| Customization: | Available |
|---|---|
| Theory: | Boiling Disinfector, |
| Type: | Boiling Disinfector |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Medical Vacuum Boiling Washer Disinfector with Ultrasonic Cleaning and Drying Function
Vacuum boiling washer - disinfector is a fully automatic cleaning, disinfection and drying equipment integrating decompression boiling cleaning and vacuum ultrasonic cleaning. Decompression boiling cleaning and vacuum ultrasonic cleaning can be carried out at the same time, and can also work separately, which makes up for the shortage of single decompression boiling cleaning, guarantees the cleaning requirements of various instruments, shortens the cleaning and disinfection time, and reduces the cost of equipment use. Through the positive and negative pressure pulse technology of the cleaning cabin, the lowtemperature negative pressure boiling pulse cleaning, vacuum ultrasonic cleaning and mixed cleaning technology are formed. Thermal disinfection is used to carry out wet heat disinfection, lubrication and rust prevention for instruments, and pulsating drying and vacuum drying are used to achieve thorough and rapid drying of instruments.
| Product Model | Capacity (L) | Power Supply | Ultrasound Frequency (KHz) Optional | Vacuum Degree | Drying Mode | Scaling Door Type |
|---|---|---|---|---|---|---|
| JK-NOX1200 | 120 | AC380/50HZ | Single-frequency or multi-frequency optional | 0.01MPA-0.08MPA | Vacuum + Pulsation | Manual Door / Automatic Lift Door |
| JK-NOX1500 | 150 | AC380/50HZ | Single-frequency or multi-frequency optional | 0.01MPA-0.08MPA | Vacuum + Pulsation | Manual Door / Automatic Lift Door |
| JK-NOX1800 | 180 | AC380/50HZ | Single-frequency or multi-frequency optional | 0.01MPA-0.08MPA | Vacuum + Pulsation | Manual Door / Automatic Lift Door |
| JK-NOX3600 | 360 | AC380/50HZ | Single-frequency or multi-frequency optional | 0.01MPA-0.08MPA | Vacuum + Pulsation | Double Open / Automatic Lower Door |
HIGHLIGHT
Tested and approved by national third-party institutions.
Effectively cleans and disinfects a variety of medical instruments, including endoscopes, orthopedic tools, dental equipment, and more.
Certified with ISO13485, ISO9001, ISO14001, and CE standards.
Registered with a Class II Medical Device Registration Certificate and holds a valid production license.
Equipped with multiple protection features such as overcurrent, overvoltage, water shortage, overheating, and consumable shortage alarms.
Door safety protection automatically halts operation if any obstruction is detected during door movement.
Owns several national patents for product technology, which are protected by national intellectual property laws.
Combines vacuum boiling cleaning, vacuum ultrasonic cleaning, thermal disinfection, and mixed cleaning.
Fully automatic PLC control with 6-10 preset and custom programs to meet various cleaning needs.
Capable of processing approximately 10 minimally invasive surgical instruments or 20 surgical kits in one cycle.
Ideal for medium to large hospital sterilization departments (CSSD).
| Feature | Description |
|---|---|
| Multi-Level Water Adjustment | Water level in the cleaning tank is adjustable in stages to meet the needs of different instruments, saving water and improving efficiency. |
| Automatic Chemical Dosing | Automatically calculates and adds the correct amount of cleaning solution, lubricant, and rust inhibitor. |
| Dual Drying Technology | Combines vacuum drying and pulsating drying to ensure quick and thorough drying. |
| Thermal Disinfection | Uses wet heat disinfection technology that achieves A0 ≥ 300, with automatic lubrication and rust prevention. |
| Double Water Tank Design | Dual tanks reduce cycle time and enhance operating efficiency. |
Application Fields: Cleaning and disinfection of various hospital equipment such as soft and hard endoscopes, orthopedic instruments, oral instruments, silicone devices, etc.
Automatic Mode Switching: Automatically identifies and applies the correct cleaning mode (vacuum boiling, ultrasonic, or mixed).
Common Instruments: Can be cleaned directly after disassembly, no special racks or trays required.
Complex Instruments: Suitable for instruments with lumens, irregular shapes, or joints.
Laparoscopes & Tubular Instruments: Does not require extra docking, can be cleaned directly after disassembly, significantly reducing labor intensity and preparation time.
Hefei Sada Medical Equipment Co., Ltd. accumulating over a decade of expertise since 2012 based in Anhui, China.
We stand as a renowned manufacturer of sterilization equipment and a leading supplier in China. For over ten years, we've been committed to delivering exceptional one-stop service for medical sterilizers, offering competitive pricing and quality products to over 1000 hospitals, clinics, research institutions, and universities.
Our principal markets extend across Southeast Asia, South America, Africa, Western Europe, and America. We ensure the safe transfer and high quality of goods for our customers. Our products come with a two-year warranty, and we provide online training for all our medical devices. We offer OEM/ODM services tailored for our customers. As SADA Medical continues its swift expansion, we have built a robust technical R&D team and a dynamic sales team.
We fulfill our customers' needs by delivering comprehensive support, convenient purchasing options, and prompt after-sales service. We are eager to expand our reach and partner with more customers globally, whether you are a distributor or end user, as we strive to become your reliable long-term partner.
Our payment terms include Telegraphic Transfer in advance, Western Union, MoneyGram, PayPal, etc.
1.What is your warranty for the products?
We offer 2 years warranty and lifetime service!
2.What is your after-sales service?
We provide technical support through operating manual and video; Once you have questions, you can get our engineer's prompt response by email,phone call,or training in factory. If it's hardware problem, within the warranty period, we will send you spare parts for free, or you send it back then we repair for you freely.
3.What is the delivery time?
We have shipping agent,we can deliver the products to you by express,air freight,sea.Below is some delivery time for your reference:
Express:UPS,DHL,TNT,ect (door to door),7-10 days
Hand carry:Send to your hotel,your friends,your forwarder,your sea port or your warehouse in China.
Air freigt(from airport to airport):3-10 days
Sea(any sea port):Mombasa(30 days), Port Kelang (12 days),Manila(10 days), Lagos(45 days), Guayaquil(45 days)
4.Can you customize?
Yes, Customized for Pannel, Voltage
5.How to place the order?
Send Proforma Invoice before order be placed, and arranging production after payment.
6.What is your lead time of the product?
Portable type 5-10days, Table top and Vertical type 10-25days, Horizontal medium type 10-20days, Large type 30-35days
){kind=link}