Fully Stainless Steel Horizontal Autoclave Ha-Bd with Drying Function and Built-in Safety Pilot and Alarm System

Product Description

 

 HA-BD 150L horizontal autoclave machine steam sterilizer

Product Description

The Sada Medical HA-BD Series Stainless Steel High-Pressure Steam Autoclave is a heavy-duty horizontal sterilizer engineered for hospital CSSD departments, surgical centers, veterinary hospitals, and research laboratories that demand large-capacity sterilization with uncompromising operator safety. Available in 150L, 200L, and 280L chamber volumes, the HA-BD combines full 304 stainless steel construction, built-in drying, and a unique multi-layered safety interlock system that actively prevents the operator errors most commonly associated with pressure equipment accidents.

Features of Horizontal Pressure Steam Sterilizer

• Steam Block Until Door Fully Sealed - Eliminates Operator Error: Steam physically cannot enter the jacket or chamber until the door is fully closed and latched. If the door isn't sealed, the pilot light stays off and the steam valve remains blocked, preventing the most common cause of sterilizer-related accidents-an open or partially closed door.

• Automatic Pressure Lock - Door Cannot Open Above 0.027 MPa: Once internal pressure exceeds 0.027 MPa, the door locks automatically and stays locked until pressure drops safely below this threshold. No manual override, no chance of an operator accidentally releasing a pressurized door.

• Anti-Tamper Protection During Cycle - Steam Dump if Door Is Forced: If an operator attempts to open the door during a running cycle, the system immediately closes the jacket valve and opens the chamber valve to safely release residual pressure. This prevents a dangerous steam burst and protects the person at the door.

• Built-in Drying Function for Wrapped Packs and Textiles: Adjustable 0-60 minute post-sterilization drying uses residual chamber heat to thoroughly dry gowns, drapes, dressings, and wrapped instrument packs-eliminating moisture that can cause recontamination and ensuring sterile goods are ready for immediate storage.

• Water-Shortage Auto-Protection with Buzzer and Safe Shutdown: If water level drops too low, the system lights the water-shortage indicator, cuts power to the heater and sterilization pilot, sounds a loud buzzer, and safely releases steam-preventing dry-running heater damage and alerting staff immediately.

• Independent Mechanical Safety Valve - Redundant Over-Pressure Protection: Should the electronic temperature controller fail and pressure rise above 0.165 MPa, a purely mechanical safety valve opens independently of any electronic system, releasing steam to the water line. This redundant backup operates even during a complete electrical failure-critical for unattended overnight cycles.

• Overload and Leakage Electrical Protection: Built-in overload and leakage detection cuts power instantly if excessive current or electrical leakage is detected. This protects both the autoclave's internal components and the building's electrical infrastructure, meeting hospital electrical safety requirements.

• Full Stainless Steel Construction - Inside and Out: Chamber, door, and all exterior housing are 304 stainless steel. No painted surfaces to peel, no plastic panels to crack after repeated exposure to steam and disinfectants-just durable, hygienic construction that maintains a professional appearance through years of heavy use.

• Automatic Cool Air Exhaust for Effective Steam Penetration: At the start of each cycle, the system automatically purges cool air from the chamber, ensuring that saturated steam-not trapped air-contacts every instrument surface, delivering consistent sterilization even in large 280L loads.

• Simple Indicator Light Panel - Status at a Glance: The control panel uses clear pilot lights to show door lock, heating, sterilizing, drying, and water-shortage status. Staff can verify cycle progress from across the room without approaching the machine-practical visibility for busy CSSD environments.

• Adjustable Temperature from 40°C to 134°C with Independent Sterilization and Drying Timers: Wide temperature range supports everything from 134°C rapid instrument cycles to 121°C standard cycles and low-temperature settings for heat-sensitive media. Separate 0-60 minute timers for sterilization and drying give full process control.

Detailed Photos

Techincal Specifications:

Model	HA-BD150	HA-BD200	HA-BD280
Chamber Volume	150 Liters	200 Liters	280 Liters
Chamber Size (Ø × H)	Ø440 × 1000 mm	Ø515 × 1000 mm	Ø600 × 1000 mm
Working Pressure	0.22 MPa	0.22 MPa	0.22 MPa
Working Temperature	134°C	134°C	134°C
Temperature Range	40 - 134°C adjustable	40 - 134°C adjustable	40 - 134°C adjustable
Sterilization Time	0 - 60 minutes adjustable	0 - 60 minutes adjustable	0 - 60 minutes adjustable
Drying Time	0 - 60 minutes adjustable	0 - 60 minutes adjustable	0 - 60 minutes adjustable
Temperature Uniformity	≤ ±2°C	≤ ±2°C	≤ ±2°C
Power Supply	9 kW / AC 380V, 50Hz	9 kW / AC 380V, 50Hz	12 kW / AC 380V, 50Hz
Overall Dimensions (approx)	1400 × 650 × 1600 mm	1400 × 750 × 1700 mm	1520 × 910 × 1900 mm
Net Weight (approx)	340 kg	350 kg	462 kg
Material	Full 304 Stainless Steel	Full 304 Stainless Steel	Full 304 Stainless Steel
Safety Interlocks	Door Seal Detection, Auto Pressure Lock (>0.027 MPa), Anti-Tamper Steam Dump
Over-Pressure Protection	Independent Mechanical Safety Valve (0.165 MPa)
Water Protection	Auto Water-Shortage Cut-Off with Buzzer and Steam Release
Electrical Protection	Overload and Leakage Detection with Instant Power Cut-Off
Drying	Built-in, 0-60 min Adjustable Timer, No Steam Discharge
Control Panel	Pilot Lights (Door Lock, Heating, Sterilizing, Drying, Water Shortage)
Certification	CE, ISO 13485	CE, ISO 13485	CE, ISO 13485

Dimensions and weights are approximate; please confirm with our team when ordering. All models include stainless steel loading baskets/shelves, power cable, water connection kit, user manual, and online support.

  Applications:

• Hospital CSSD & Surgical Centers - wrapped surgical instrument trays, gowns, drapes, dressings, rubber goods

• Veterinary Hospitals & Animal Research - surgical packs, cages, feeding equipment, rubber mats

• Dental Clinics & Dental Laboratories - bulk instrument processing, impression trays, wrapped handpiece kits

• Microbiology, Life Science & Pharmaceutical Laboratories - culture media, glassware, liquid reagents, biohazard waste

• Tattoo & Body Piercing Studios - grip tubes, needle bars, wrapped jewelry packs

• Funeral Homes & Prosthetics Fabrication - reusable instruments and dressing materials

• Research Institutes & Universities - laboratory consumables, discard cycles, media preparation

Why Choose Sada Medical HA-BD Horizontal Autoclave?

• Safety That Anticipates Human Error: Other sterilizers rely on a single door switch. The HA-BD uses three independent safety actions: steam cannot enter until the door is sealed; the door locks automatically under pressure and stays locked; if forced, steam is dumped safely. It's engineered for real-world CSSD environments where mistakes happen-and it protects your staff when they do.

• Independent Mechanical Backup - Works Even Without Electricity: The mechanical safety valve opens at 0.165 MPa with no electronics required. If the controller fails, if power is lost, if sensors malfunction-the mechanical valve still works. For facilities running unattended overnight sterilization, this redundant protection is non-negotiable.

• Dry Loads, Not Wet Packs: The built-in drying function with adjustable timer uses residual chamber heat-not a separate blower-to dry wraps and textiles. No steam discharge into the room means your CSSD stays comfortable and your sterile packs go directly from chamber to shelf without a separate drying step.

• Full Stainless Steel - No Rust, No Peel, No Replacements: Painted steel autoclaves look good for a year and then start rusting. The HA-BD is 304 stainless steel throughout-chamber, door, exterior. It withstands daily wipe-downs, high humidity, and years of continuous use without degrading.

• Simple Controls That Anyone Can Read Across the Room: The pilot light panel shows exactly what's happening-door locked, heating, sterilizing, drying, water low-from across the CSSD. No interpreting digital codes, no navigating menus. If a light is on, the status is clear.

• Three Sizes, One Standardized Design: Whether you need 150L for a smaller clinic or 280L for a central processing department, the HA-BD series offers identical operation, identical safety features, and identical maintenance procedures-simplifying staff training and spare parts management across your facility network.

• CE & ISO 13485 Certified - Not Just a Sticker: Every HA-BD is manufactured under our certified quality management system and carries verifiable certifications. Your procurement and regulatory documentation is supported by genuine compliance, not marketing claims.

• 1-Year Warranty, 24-Hour Response: Sada Medical provides a 1-year warranty, lifetime service, and technical support that responds within 24 hours. Free spare parts for hardware issues within warranty. We understand that when your sterilizer is down, your facility's workflow stops-and we act accordingly.

• Factory-Direct from a Global Sterilization Equipment Manufacturer: Sada Medical exports steam autoclaves, plasma sterilizers, and EO sterilizers to healthcare providers and distributors worldwide. Buying factory-direct means competitive pricing, customization flexibility, and direct access to the engineering team that builds and supports your equipment.

Packaging & Shipping

Certifications

Company Profile

Hefei Sada Medical Equipment Co., Ltd has more than 10 years experience since 2012 located in Anhui, China.
We are a professional sterilization equipment manufacturer and leading supplier in China.For more than ten years, we engage in offering our customer one stop service in medical sterilizer, supplying competitive price and quality products to more than 1000 hospitals clinics, research institutions and universities.
Our main market is in South Est Asia, South America, Africa, West Europe & America. We guarantee the transfer safety and also the goods quality for customers. All our products we will supply 2 years warranty for all customers. And we will supply online training for our medical devices. We supply O E M/ O D M service for customers. With the rapid development of SADA Medical, we build strong technical R&D team and sales team. 
We satisfy our customers by offering comprehensive support, purchase convenience and intime after-sales service, and we are ready to serve more and more customers in the world, no matter you are distributor or end user, we are eagerly to cooperate with you and be your long term partner.
 

FAQ

1.What is your warranty for the products?
We offer 2 years warranty and lifetime service!

2.What is your after-sales service?
We provide technical support through operating manual and video; Once you have questions, you can get our engineer's prompt response by email,phone call,or training in factory. If it's hardware problem, within the warranty period, we will send you spare parts for free, or you send it back then we repair for you freely.

3.What is the delivery time?
We have shipping agent,we can deliver the products to you by express,air freight,sea.Below is some delivery time for your reference:
Express:UPS,DHL,TNT,ect (door to door),7-10 days
Hand carry:Send to your hotel,your friends,your forwarder,your sea port or your warehouse in China.
Air freigt(from airport to airport):3-10 days
Sea(any sea port):Mombasa(30 days), Port Kelang (12 days),Manila(10 days), Lagos(45 days), Guayaquil(45 days)

4.Can you customize?
Yes, Customized for Pannel, Voltage

5.How to place the order?
  Send Proforma Invoice before order be placed, and arranging production after payment.
  WHAT IS YOUR LEAD TIME OF THE PRODUCTS?
Portable type 5-10days, Table top and Vertical type 10-25days, Horizontal medium type 10-20days, Large type 30-35days
  WHAT IS YOUR PAYMENT TERM?
Our payment term is Telegraphic Transfer in advance,Western union, MoneyGram,Paypal,ect.